£32.00 GBP

 

  • PLANT & ALGAE BASED CLEANER - new generation cleaner that lifts soil and dirt trapped in the grain.
  • PROTECT - the Blocker's hybrid polymers prevent dye transfer and repel loose dye from clothing.
  • ABRASION DAMAGE – The Blocker acts as an invisible barrier reducing friction and abrasion damage.
  • BREATHABILITY & SOFT TOUCH – retains air & water vapour movement through leather for a natural feel.
  • LIGHT COLOURS – Perfect protection for light-coloured leather as dye transfer shows the most.
  • NO GLOSS, NO SMELL – The Blocker does not add any gloss, leaves no residue and has no scent.
  • QUALITY – Designed in Germany. Our products contain no 'PFOA' harmful chemicals or 'nanoparticles'.
Clean and shield from dye transfer & abrasion damage | The only protection new leather (0-3 yrs) or leatherette needs.

Pigmented (non-porous) leather commonly found in cars, furniture and other leather items has a coloured protective finish. Modern leather finishes are high-tech - they are elastic, wear-resistant and, very importantly, air and water vapour permeable. Most high-quality vinyl or PU leather imitations are also coated with protective finishes. These finishes are protected with a clear coating called a ‘topcoat’ which carries waxes and additives that give the surface a soft touch, and prevent scratches, wear, creaking and squeaking. The elastic finish must be protected for the surface to retain its new look,
and soft touch and stay squeak free. Why 3 Minus? New leather has an optimum balance of moisture and oil. Protecting the topcoat is therefore the priority. During this time, applying a leather conditioner shows little or no benefit. For the 3 first years: use Geist. Dye & Friction Blocker to protect against dye transfer and friction damage after cleaning.

What is it for?

  • Suitable for leather, vinyl, artificial leather, vegan leather, fake/faux leather or pleather. Works for all leather colours. Not suitable for absorbent leather like aniline, suede or nubuck.
  • Clean with Rapid Cleaner.
  • Protect with Dye & Friction Blocker

What is in the box?

  • Rapid Leather & Vinyl Cleaner 500ml/16.75 fl.oz
  • Dye & Friction Blocker 300ml/10.5 fl.oz
  • Sponge, 2 cloths & cleaning brush 
3 Minus Kit 3 Plus Kit
Leather age New-3 years old Older than 3 years
Rapid Cleaner
Leather Conditioner X
Dye & Friction Blocker

FAQs

Q: What damages the leather finish or vinyl?

A: Friction (sharp zippers, studs, rings, buckles), dye transfer from clothing (e.g. jeans), sweat, sand and dust, and very often harsh chemicals that are found in common cleaners (e.g. high pH or solvents).

Q: What is most important if I want to protect my leather to look new and stay soft longer?

A: Three golden rules…1. Remove stains as soon as possible.
2. Protect the surface with a proven quality blocker such as Geist. Dye & Friction Blocker which is invisible and highly effective.
3. Don’t use household or ‘all-round’ cleaners.

Q: Why do some textiles discolour surfaces?

A: Because they often contain ‘unfixed’ dyes and ‘effect pigments’ on their surfaces.




Instructions

  • STEP 1: For regular cleaning, spray the product onto a cloth and wipe the surface, or spray Rapid Cleaner onto a sponge to create foam, and work on to the surface from seam to seam allowing it to lift the soiling from the pores for about 2-3 minutes. Wipe off with a lint-free cloth. If needed, leave on difficult stains for longer. For deeper cleaning, scrub gently with the brush included and wipe off using a lint-free cloth or microfibre towel away from sunlight and heat. Extreme stains on vinyl and on colour-fast leather can be treated with the cleaner and left for longer periods, several hours if needed, before working gently with the cleaning brush. Always test in a hidden area for colour loss before cleaning. Poorly or old recoloured leather/vinyl paints can rub off when wet cleaned.
  • STEP 2: Spray the Dye & Friction Blocker onto a clean lint-free cloth and wipe evenly. Allow to dry. For maximum protection, apply after every cleaning treatment or once every 3 months.

 

SDS

Safety Data Sheets are available separately for each component of the kit. See individual product pages.